Step Speed Head 3HP Feature 3 HP Spindle Motor 10"x 50"table standard Spindle Taper NST# 30, or R8, Spindle Taper NST# 40 optional. Special Square Head for Step Speed X,Y,Z-axes. Dovetail slide ways X.Y.-axes Coated with Teflon – B X.Y,Z.-axes Hardened & Ground Optional Equipment Coolant System Chip (pan ) Guard Work Lamp Electrical Cabinet Power feed - X,Y,Z .Axes Precision Ball Screw Milling Vise , Clamping Kits Milling Chuck with Collets Digital Readout - X,Y,Z .Axes Standard Accessories Draw Bar Tools & Tool Box Operation Manual One Shot Lubrication Front & Rear Plastic Splash Guard
Step Speed Head 3HP
Feature
Optional Equipment
Standard Accessories
Working Surface | 254x1270 mm |
Longitudinal Travel (X-axis) | 830 mm |
Cross Travel (Y-axis) | 410 mm |
Knee Travel (Z-axis) | 410 mm |
T-slot (3) | 15,9 mm |
Quill Travel | 127 mm |
Quill Diameter | 85,725 mm |
Spindle Taper | R8 or N.S.T#30 |
Quill Feeds | 0,04/0,08/0,15 |
Spindle Motor | 3 HP |
Step Spindle Speed |
50Hz : 70~2720 16speed : 70~4530 rpm (OPT) 60Hz : 80~2720 16speed : 80~5440 rpm (OPT) |
Overall Height A | 2256 mm |
Overall Depth B | 2000 mm |
Overall Width C | 1688 mm |
Ram Travel | 560 mm |
Overarm Swivel on Turret | 360o |
Head Tilf Front to Back | 40o - 0o - 45o |
Head Tilf Left to Right | 90o - 0o - 90o |
Approx. Net Weight | 1209 kgs |
Packing Dimensions | 161x149x186 cm |
To receive further information on PF-3S, please complete the following form. We will reply as soon as possible