MAYKESTAG END MILLS "SPEEDCUT" - INOX DIN 6535-HA (SHANK)

MAYKESTAG END MILLS

Maykestag End Mills "Speedcut" – Inox are made of the best fine grain carbide which produces higher hardness, heat endurance and bending strength. Maykestag manufactures Maykestag End Mills "Speedcut" – Inox with the most up-to-date coating technology for your stability and wear resistance. The Maykestag's optimised tool geometry provides higher surface quality of the material to be machined and higher tool stability (even in unstable working conditions). Maykestag End Mills "Speedcut" – Inox are highly recommended  for cutting in austenitic stainless steels. It offers high cutting performance for fine-finishing, finishing, rough finishing and roughing – all with the same tool. Maykestag End Mills "Speedcut" –…

Read more

Contact us for more information :

+62 21 62 63 851 / 52
marketing@yakinmaju.com

Maykestag End Mills "Speedcut" – Inox are made of the best fine grain carbide which produces higher hardness, heat endurance and bending strength. Maykestag manufactures Maykestag End Mills "Speedcut" – Inox with the most up-to-date coating technology for your stability and wear resistance. The Maykestag's optimised tool geometry provides higher surface quality of the material to be machined and higher tool stability (even in unstable working conditions).

Maykestag End Mills "Speedcut" – Inox are highly recommended  for cutting in austenitic stainless steels. It offers high cutting performance for fine-finishing, finishing, rough finishing and roughing – all with the same tool. Maykestag End Mills "Speedcut" – Inox also have the spiral angle which creates smooth, vibrationless running and excellent surface. It is suitable for stainless steel material with tensile strength up to 1300 N/mm2.

 

To serve your interest on Maykestag products, kindly contact our Sales Department

d1h10

mm

d2h6

mm

l1

mm

l2

mm

45 Z
3 6 57 8 0.15 4
4 6 57 11 0.15 4
5 6 57 13 0.25 4
6 6 57 13 0.25 4
8 8 63 19 0.25 4
10 10 72 22 0.25 4
12 12 83 26 0.25 4
14 14 83 26 0.35 4
16 16 92 32 0.35 4
20 20 104 38 0.35

4

MAYKESTAG END MILLS "SPEEDCUT" - INOX DIN 6535-HA (SHANK)

 

-DIN 6535-HA (Shank)

-ALUNIT-S® (Special coating for highest cutting performance)

-ISO Certification: ALPEN-MAYKESTAG has been certified to EN ISO 9001 on all sites since 2000.

 

Request A Quote

To receive further information on MAYKESTAG END MILLS "SPEEDCUT" - INOX DIN 6535-HA (SHANK), please complete the following form. We will reply as soon as possible


Sorry, this product does not have video.