Wingo - Turret Motorized Press

Hot Mounting Presses - Turret Motorized Press Model P-4101

A power hydraulic press that enables a mounted specimen to be unloaded by a one-touch operation. The gas venting process is also incorporated.

Sample deflexion during grinding/polishing can be prevented by mounting the sample in resin. Through this process the specimen are easier to hold with the fingers during manual grinding/polishing. The stable grinding/polishing conditions can be performed by setting the specimen in a holder for automatic grinding/polishing.

Wingo's Hot Mounting is extremely advantageous, especially with small and irregularly shaped materials, and it enables excellent specimen surfaces to be obtained. A material can be mounted in resin in a short time by hydraulic pressing and heating by a temperature-controlled heater in the Handy press, Semi-automatic press or Motorized press model.

Tips:

• A hot mounting resin is used as the mounting resin. 
• Open the seal for prevention measure of deposition of resin waste. 
• Adjust the hydraulic pressure to prevent over pressure. 
• Attached the heater cover as soon as possible.

If you have any kind of questions or any interests for our product, feel free to contact us here