KOYO-SHA TITANIUM BUFFING & POLISHING COMPOUND

KOYO-SHA TITANIUM BUFFING & POLISHING COMPOUND thumbnail

Started in Tokyo 1926, Koyo Sha manufacture the finest standard of polishing and finishing solution for various industrial application. The Koyo-sha product ranges are all adhere to ISO9001 and ISO14001 to meet your strictest quality assurance and fabrication standards. Koyo-Sha Buffing & Polishing compound have wide varieties and selection to choose from. Titanium which was previously difficult to have a luster finish, can easily be polished to surface equivalent with #400 and #600 finish of stainless steel. With the right sisal and buffing disc, each Koyo-sha Buffing & Polishing compound will perform superbly on polishing titanium. Prior to polishing, titanium work piece that is severely scratched may need to be sanded…

Read more

Contact us for more information :

+62 21 62 63 851 / 52
marketing@yakinmaju.com

Started in Tokyo 1926, Koyo Sha manufacture the finest standard of polishing and finishing solution for various industrial application. The Koyo-sha product ranges are all adhere to ISO9001 and ISO14001 to meet your strictest quality assurance and fabrication standards.

Koyo-Sha Buffing & Polishing compound have wide varieties and selection to choose from. Titanium which was previously difficult to have a luster finish, can easily be polished to surface equivalent with #400 and #600 finish of stainless steel. With the right sisal and buffing disc, each Koyo-sha Buffing & Polishing compound will perform superbly on polishing titanium.

Prior to polishing, titanium work piece that is severely scratched may need to be sanded down. Once the scratch depth is minimal, it is advised to start with the coarsest compound that is applicable such as Koyo-Sha's TP-100. From there one should than move down to the next buffing compound such as Koyo-Sha TP-401 and so on until the desired finish is achieved.

Koyo-sha Buffing & Polishing Compound For Titanium Are As Follows:

 1. TP-100

A polishing compound which is designed by attaching greater importance in high cutting power, and it shows much effect in a process of removing scratches and waves of materials. by using TP-200 compound after this stage, cloth buff finish will be easier.

2. TP-200

A polishing compound of good balance of cutting and coloring. It is considered as a standard product for sisal buff. suitable for cutting and coloring to get a smooth surface without pin holes.

3. C-800

4. TP-300

An indispensable polishing compound for a process of luster finish. it removes sisal patterns smoothly, and a luster surface equivalent to #400 finish of stainless steel can be obtained.

5. TP-401

It prevents works to have pin holes and buff scratches during a "green rouge compound finish" process, while polishing at high load. by using TP-401, a luster surface with a high reflection rate equivalent to #600 finish of stainless steel can be obtained.

To serve your interest on various Koyo-Sha solutions, kindly contact our Sales Department

Koyo-sha Buffing & Polishing Compound On Application Are As Follows:

 

Koyo-sha Buffing & Polishing Compound:

 

To serve your interest on various Koyo-Sha solutions, kindly contact our Sales Department

Request A Quote

To receive further information on KOYO-SHA TITANIUM BUFFING & POLISHING COMPOUND, please complete the following form. We will reply as soon as possible


Sorry, this product does not have video.