MARK-10 WIRE CRIMP PULL TESTER WT-205M
MARK-10 WIRE CRIMP PULL TESTER SPECIFICATION
| Capacity x Resolution: | 200 x 0.1 lbF | 3200 x 2 ozF | 100 x 0.05 kgF | 1,000 x 0.5 N | 1 x 0.0005 kN | |
| Accuracy: | ±0.2% of full scale | |
| Wire gauge range*: | AWG30 - AWG 3* [0.01 - 0.25 in (0.3 - 6.3 mm) dia.] | |
| Sample length range: | 2.1 in [53.3 mm], excluding termination | |
| Max. elongation: | 2.3 in [58.4 mm] | |
| Speed range: | Test/Pull Speed: 0.4 - 12.0 in/min [10 - 300 mm/min] Approach/Preload Speed: 12.0 - 20.0 in/min [300 - 500 mm/min] Return Speed: 12.0 - 45.0 in/min [300 - 1,125 mm/min] |
|
| Speed setting accuracy: | ±0.2% | |
| Speed variation with load: | ±0% [Stepper motor driven] | |
| Power: | Universal input 80-240 VAC, 50/60 Hz | |
| Sampling rate: | 7,000 Hz | |
| Outputs: | USB / RS-232: Configurable up to 115,200 baud. Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC at capacity, ±0.25% of full scale. General purpose: Three open drain outputs, one input. Set points: Three open drain lines, 40 VDC max., 100 mA DC max. |
|
| Overload protection: | Motor stops at 120% of full scale of the force sensor (display shows “OVER” at 110% and above) | |
| Weight: | 28 lb [12.7 kg] | |
| Shipping weight: | 33 lb [15.0 kg] | |
| Environmental requirements: | 40 - 100°F, max. 96% humidity, non-condensing | |
| Warranty: | 3 years (see individual statement for further details) | |
| HS code: | Model no. | HS code: |
| WT-205M All optional functions |
9024100000 | |
| CERT 15-1004 WT3004 WT3002 WT3003 AC1049 AC1109 AC1111 |
9024800000 | |
| ECCN: | EAR99 | |
| Country of origin: | USA | |
If you have any kind of questions or any interests for our product, feel free to contact us here
To receive further information on MARK-10 WIRE CRIMP PULL TESTER WT-205M, please complete the following form. We will reply as soon as possible
